Learn how to apply wax to skis
People who learn ski waxing ‘do it yourself’ techniques benefit in many ways. The biggest of which is obviously a financial benefit. Skiing is a sport that costs money.
Plain and simple.
Traveling to the resort, buying or renting skis and equipment, and getting a lift ticket: these are all things that can prove to be very expensive. Why spend even more money on a professional to wax your skis?
The answer is simple: you shouldn’t. Not when you can just as easily do it yourself.
Here’s how:
How to Wax Skis: Everything You Will Need
In order to do the best job possible waxing your skis, you will need to have with you the following items:
- Skis
- Ski wax (available at every major ski equipment retailer)
- Sawhorses or similar supports
- Electric iron (the older the better)
- A few pages of newspaper
- A brush with nylon bristles
- A scraper
Each of these items is easy to find. If they aren’t already in your garage or closet, then the local hardware or all-purpose store will surely have everything you need.
Applying Wax to Skis
Here’s a step by step list of instructions for you to follow to improve your ski waxing techniques. Ski waxing Do-It-Yourself is a fairly simple process as long as you stick to these directions.
1. With the sawhorses set up, place the pages of newspaper on the ground between them. This is to help catch any stray drops of wax. It’s much easier to just throw away a soiled piece of newspaper than to clean wax out of a carpet or off the floor.
2. Place the skis on top of the sawhorses upside down, so that the bindings are facing the ground and the bottoms are facing the ceiling.
3. Heat up the ski wax with the electric iron on low. This part takes a little time, but you want to make sure it is at the right temperature. You don’t want to burn the wax, just get it hot enough for the wax to drip onto the skis.
4. At a rate of approximately 3 drops every inch, evenly spread the wax along each of your skis.
5. Once the wax has cooled, use the iron on the skis to melt it along the ski base.
6. Once the wax has cooled again, use the scraper to get rid of any excess wax.
7. Now brush the bottom of the skis and you are ready to carve your way down the nearest mountain.
How to Wax Alpine Skis
If you are going to wax your alpine skis or cross-country skis, then the ski wax instruction process remains the same. The only difference is in the wax itself.
Make sure you always pay attention to what you’re buying when it comes to ski waxing ‘do it yourself’ techniques.
Return from How to Wax Alpine Skis to Alpine Skiing Tips and Instructions
Return from Ski Waxing Instructions to Skiing Experts: Advice on Ski Gear
Related posts: